NURBS三参数实体造型及在模具CAD/CAM中的应用
作者:

NURBS TRI PARAMETRIC SOLID MODELING ANDITS APPLICATION IN CAD/CAM OF DIES
  • 摘要
  • | |
  • 访问统计
  • |
  • 参考文献 [1]
  • |
  • 相似文献 [20]
  • | | |
  • 文章评论
    摘要:

    在大量CAD/CAM应用类问题中,不但需要描述实体的外形,也要求表达实体的内部信息.针对这个要求,本文提出了NURBS三参数实体造型方法和形体构筑技术.本文将此方法应用于模具CAD/CAM系统中,如有限元建模中的形体三维有限元网格生成及相应的应力分析、质量特性计算等问题.

    Abstract:

    In many application problems of CAD/CAM, people not only need to describe the exterior of solids, but also want to know the information within the solids. In the light of this situation, this paper displays the method of NURBS tri parametric solid modeling and some construction techniques. Also the paper discusses some applicational problems in CAD/CAM of dies, such as 3 D finite element mesh generating and mass properties calculation, which are based on this method.

    参考文献
    1 Piegl L.Key developments in computer aided geometric design.CAD,1989,(5):262~274. 2 唐荣锡.CAD/CAM技术.北京:北京航空航天大学出版社,1994.99~149. 3 Barr A H.Global and local deformations of solid primitives.CG,1984,(3):21~30. 4 Lamousin Henry J,Wagger Warren N.NURBS-based free form deformations.IEEE CG&A,1994,(November): 59~65. 5 Coquillart S.Extended free form deformation:a sculpturing tool for 3D geometric modeling.CG,1990.(4):187 ~193. 6 Nahas M,Huitric H.Animation of a B-spline figure.The Visual Computer.1988.(5):272~276. 7 Lein S L, Kajika J T.A symbolic method for calculating the integral properties of arbitrary nonconvex polyhedra. IEEE CG&A.1984,(October):35~41.
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

孙善忠,刘晓强,阮雪榆. NURBS三参数实体造型及在模具CAD/CAM中的应用.软件学报,1997,8(1):71-74

复制
分享
文章指标
  • 点击次数:3929
  • 下载次数: 4991
  • HTML阅读次数: 0
  • 引用次数: 0
历史
  • 最后修改日期:1995-12-28
文章二维码
您是第19819318位访问者
版权所有:中国科学院软件研究所 京ICP备05046678号-3
地址:北京市海淀区中关村南四街4号,邮政编码:100190
电话:010-62562563 传真:010-62562533 Email:jos@iscas.ac.cn
技术支持:北京勤云科技发展有限公司

京公网安备 11040202500063号