多裁剪自由曲面生成有限元网格的实现
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

Supported by the National High-Tech Research and Development Plan of China under Grant No.863-511-820-020(国家高技术研究发展计划(863))


Implementation of Finite Element Method Mesh Generation from Multiple Trimmed Free Surfaces
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    论述了多裁剪自由曲面生成有限元曲面网格的几个关键技术.采用了推进波前法生成曲面网格,给出了核心算法;在曲面算法中运用了介于参数法与直接法之间的新方法.针对求解曲面上最优点的参数域反算问题,引入了切矢逆求方法,可使迭代次数大为降低.测试表明,该算法快速、稳定.对大型的多裁剪自由曲面生成的曲面有限元网格,可直接用于有限元计算.

    Abstract:

    In this paper, some key techniques about FEM surface mesh generation from multiple trimmed free surfaces are presented. The Advancing Front method is adopted and its kernel algorithm is given. A new method combining the parametric space method and direct 3D method is used during the surface calculation. As for the parametric space calculation to find an optimal 3D point, the Tangent Vector Inversion is presented so as to cut down iteration. Test results show this algorithm is quicker and more robust. The FEM mesh generated from large multiple trimmed free surfaces can be applied to finite element method directly.

    参考文献
    相似文献
    引证文献
引用本文

张苏,施法中.多裁剪自由曲面生成有限元网格的实现.软件学报,2005,16(11):2008-2013

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2004-05-27
  • 最后修改日期:2005-01-07
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
您是第位访问者
版权所有:中国科学院软件研究所 京ICP备05046678号-3
地址:北京市海淀区中关村南四街4号,邮政编码:100190
电话:010-62562563 传真:010-62562533 Email:jos@iscas.ac.cn
技术支持:北京勤云科技发展有限公司

京公网安备 11040202500063号