带约束的曲面放缩
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

Supported by the National Natural Science Foundation of China under Grant No.60173052 (国家自然科学基金); the Natural Science Foundation of Shandong Province of China under Grant No.Z2001G01 (山东省自然科学基金)


Constrained Surface Scaling
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    提出了一种保持曲面形状特征(trimming curves)不变的曲面放缩新方法.该方法的关键是使用了一个新的目标函数来极小化放缩前后两曲面的差别.该目标函数由放缩前后两曲面对应点的导矢叉乘的平方的积分来定义.极小化该目标函数能够保证放缩前后曲面对应点的法向变化尽可能地小,从而保证两个曲面的形状和曲率分布尽可能接近.通过与Fix-and-Stretch方法的比较,新方法对一些汽车部件数据得到了更好的结果.最后给出了两种方法得到的结果曲面的高光线模型.

    Abstract:

    A new method to scale a surface while holding the shape of specific features (trimming curves) unchanged is presented. The key of this method is using a new objective function to minimize the difference of the two surfaces before and after constrained scaling. The new objective function is defined as the integral of the square of the norm of the cross product of the two normal vectors on corresponding points of the two surfaces. Minimizing this objective function guarantees that the difference of the two normal vectors on every corresponding point of the two surfaces is as small as possible, which makes the shape and curvature distribution as close as possible. Compared with the Fix-and-Stretch method, the new method gives better results for several car parts with trimming curves. The high-light line models of the resulting surfaces produced by the two methods are also included.

    参考文献
    相似文献
    引证文献
引用本文

伯彭波,张彩明.带约束的曲面放缩.软件学报,2003,14(10):1806-1812

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2002-10-21
  • 最后修改日期:2002-12-24
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
您是第位访问者
版权所有:中国科学院软件研究所 京ICP备05046678号-3
地址:北京市海淀区中关村南四街4号,邮政编码:100190
电话:010-62562563 传真:010-62562533 Email:jos@iscas.ac.cn
技术支持:北京勤云科技发展有限公司

京公网安备 11040202500063号