基于伪直母线的复杂曲面自适应分片与展开
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

Supported by the National Natural Science Foundation of China under Grant No.69973041 (国家自然科学基金); the National Grand Fundamental Research 973 Program of China under Grant No.G1998030600 (国家重点基础研究发展规划(973)); the Natural Science Foundation of Zhejiang Province of China under Grant No.698025 (浙江省自然科学基金)


A Complex Surface Adaptive Segment and Development Algorithm Based on Its Quasi-Rulings
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用自适应分片技术把拓扑结构复杂的曲面展开为平面.首先把CAD/CAM常用的参数曲面转化为三角剖分模型,求出曲面的伪直母线;然后基于伪直母线对曲面进行自适应分片;最后展开每一片曲面区域.该算法可以直接应用于计算机辅助设计、制造和计算机图形学的纹理映射,也可以应用于实际工业造型中的后继处理.

    Abstract:

    Using an adaptive segment technique, a topological complex 3D surface can be developed into its corresponding 2D pattern. Firstly, triangular facet model is used to present a complex surface, and its quasi-rulings are computed. Secondly, the 3D surface is adaptively segmented based on its quasi-ruling. Finally, each segment is flatted into 2D pattern. This development algorithm can be directly used to computer aided design or texture mapping. It can be also applied to post-process in practical industrial modeling.

    参考文献
    相似文献
    引证文献
引用本文

陈动人,王国瑾.基于伪直母线的复杂曲面自适应分片与展开.软件学报,2003,14(3):660-665

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2001-08-16
  • 最后修改日期:2002-02-28
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
您是第位访问者
版权所有:中国科学院软件研究所 京ICP备05046678号-3
地址:北京市海淀区中关村南四街4号,邮政编码:100190
电话:010-62562563 传真:010-62562533 Email:jos@iscas.ac.cn
技术支持:北京勤云科技发展有限公司

京公网安备 11040202500063号