基于Strip-Tree的无级比例尺GIS多边形化简技术
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家863高科技发展计划资助项目(863-306-04-03-3)


Polygon Simplification Based on Strip-Tree in Scaleless GIS
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    无级比例尺GIS(geographicinformationsystem)多边形化简的基础是多边形弧段的线综合,而直接对多边形的弧段施加线综合操作可能造成输出数据的拓扑错误,主要表现为化简后弧段出现相交.以往的研究并未对这个问题给予足够的重视和给出自动化的解决方法.在对此问题进行全面分析的基础上,提出了一种基于Strip-Tree的多边形图层化简策略,在保持输出数据拓扑结构正确的前提下化简多边形图层,且保持了较高的时空效率.该策略成功地应用于国家863项目“时空一体化智能城建信息系统”,并获得了满意的效率和结果.

    Abstract:

    Polygon simplification in scaleless GIS (geographic information system) is based on the line generalization of polygon arcs, but there may be topological errors in output data resulting from the direct line generalization of polygon's arcs, and the major representation of the error is the intersection of the simplified polygon s arcs. The previous research did not attach importance to this problem. A method of polygon simplification based on Strip-Tree in scaleless GIS is presented in this paper through an all-sided analysis of this problem. Maintaining the correctness of the polygon layer's topoloty, it simplifies the polygon layer according to the output scale. This method has been implemented into an 863 project, and the experimental results show that this method can simplify the polygon layer with high efficiency and can maintain the shape of polygon very well.

    参考文献
    相似文献
    引证文献
引用本文

田鹏,郑扣根,潘云鹤.基于Strip-Tree的无级比例尺GIS多边形化简技术.软件学报,2001,12(10):1495-1502

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2000-05-09
  • 最后修改日期:2000-10-16
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
您是第位访问者
版权所有:中国科学院软件研究所 京ICP备05046678号-3
地址:北京市海淀区中关村南四街4号,邮政编码:100190
电话:010-62562563 传真:010-62562533 Email:jos@iscas.ac.cn
技术支持:北京勤云科技发展有限公司

京公网安备 11040202500063号