基于软件体系结构的可复用构件制作和组装
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家"九五”重点科技攻关资助项目(98-780-01)


Building and Assembling Reusable Components Based on Software Architecture
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    软件复用和基于构件的软件开发是软件工程化开发和工业化生产的必然趋势,可复用构件的制作和集成组装是其中涉及的两个重要活动.首先分析了现有的构件集成方式所存在的不足,引出了基于体系结构的构件集成;接着对几种不同的体系结构类型进行比较,阐述了它们对构件集成的影响;然后提出了支持接口连接式和插头插座式体系结构类型的构件模型以及基于体系结构的构件集成组装框架,并给出了构件的制作和组装过程;最后对工作进行总结,并指出了进一步的研究方向.

    Abstract:

    Software reuse and component-based software development are the inevitable trend in software engineering development and industrial production. Two important activities involved are the building and integrating of reusable software components. In this paper, the drawbacks of existing methods of component s integration are analyzed first, and a new method is proposed based on software architecture. Then, several different kinds of architecture and their influences to component integration are disscused. After that, a component model supporting interface connection architecture and socket architecture, and an architecture-based component-assembling framework proposed, and the building and assembling process of software components is specified. Finally, the conclusion and further research direction are given.

    参考文献
    相似文献
    引证文献
引用本文

张世琨,张文娟,常欣,王立福,杨芙清.基于软件体系结构的可复用构件制作和组装.软件学报,2001,12(9):1351-1359

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2001-02-05
  • 最后修改日期:2001-07-05
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
您是第位访问者
版权所有:中国科学院软件研究所 京ICP备05046678号-3
地址:北京市海淀区中关村南四街4号,邮政编码:100190
电话:010-62562563 传真:010-62562533 Email:jos@iscas.ac.cn
技术支持:北京勤云科技发展有限公司

京公网安备 11040202500063号