面向软件黑箱测试的仿真环境嵌入故障研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

本文研究得到铁道部发展计划项目基金资助.


Embedding Fault in Simulation Environment for Software Black-box Testing
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    故障注入作为软件测试的一种有效技术已进入实用阶段, 然而如何在软件黑箱测试中运用故障注入技术目前尚少有文献加以论述.文章提出了软件黑 箱测试中故障外围注入的思想,通过嵌入故障的仿真环境,实现对被测软件输入级的故障引入 ,改变软件的运行状态,诱发内在的失效模式,导致错误的输出,从而达到预期的测试目的.这 一方法已应用于铁路车站信号控制系统软件的测试中,并取得了良好的效果.

    Abstract:

    Fault-injection, as a perfected technique for software testing, now has been put into practical use. However, only a very few of the documents have expounded on how to use fault-injection technique in soft ware black-box testing. A new approach to the difficulty, i.e., peripherally in jecting faults in the software is presented in this paper. By means of a fault- imbedded environmental simulation, faults are injected in the input level of the software under test. These faults may induce inherent failure mode, thus bringi ng about unexpected output--consequently, the anticipated goal of the test is attained. This method has been used for testing railway signaling control system software and desirable results have been achieved.

    参考文献
    相似文献
    引证文献
引用本文

屠海滢,吴芳美.面向软件黑箱测试的仿真环境嵌入故障研究.软件学报,1999,10(5):516-520

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:1998-04-13
  • 最后修改日期:1998-06-22
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
您是第位访问者
版权所有:中国科学院软件研究所 京ICP备05046678号-3
地址:北京市海淀区中关村南四街4号,邮政编码:100190
电话:010-62562563 传真:010-62562533 Email:jos@iscas.ac.cn
技术支持:北京勤云科技发展有限公司

京公网安备 11040202500063号