基于知识的装配前趋约束图的生成
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

本文研究得到国家自然科学基金和国家863高科技项目基金资助.


The Generation of Assembly Precedence Constraint Based on Knowledge
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    装配前趋约束图的生成是装配规划的关键环节,也是其中最困难的一步.该文在讨论了几种装配前趋约束图生成方法的具体实现以及它们的优缺点之后,提出利用几何知识和装配经验知识相结合的方法,建立装配知识库/数据库,给出了几种在复杂度上可行的解决方法.最后给出结论,并简单地讨论了结合知识的数学算法的优越性,同时讨论了今后发展的方向.

    Abstract:

    The generation of assembly precedence constraint is the key step of assembly planning and the most difficult one as well. In this paper, the implementations of some methods of generation of assembly precedence constraint are presented at first. The advantages and disadvantages of these methods are discussed as well. Then, one method which combines the knowledge of geometry and assembly experience is presented. By using the method, the assembly knowledge base and database are established. Several feasible solutions are provided at the same time. Finally, a conclusion is reached. The advantages of the method and suggestions on further research are provided as well.

    参考文献
    相似文献
    引证文献
引用本文

陈 正,张 钹.基于知识的装配前趋约束图的生成.软件学报,1998,9(7):487-495

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:1997-05-19
  • 最后修改日期:1997-06-25
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
您是第位访问者
版权所有:中国科学院软件研究所 京ICP备05046678号-3
地址:北京市海淀区中关村南四街4号,邮政编码:100190
电话:010-62562563 传真:010-62562533 Email:jos@iscas.ac.cn
技术支持:北京勤云科技发展有限公司

京公网安备 11040202500063号