基于UML的软硬件协同设计的模型分析方法
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


A UML-Based Model Analysis Method in Hardware-Software Codesign
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    详细分析了Chonlameth Arpnikanondt提出的基于UML约束的嵌入式系统的软、硬件协同设计方法(CBC/UML),并指出了它运用于复杂的嵌入式系统设计时的不足.针对这些不足,扩展了约束的概念,提出了一套相应的改善方法.并利用中国科学院软件研究所研制智能电话机的例子具体阐述了该解决方法.

    Abstract:

    In this paper, a UML approach applied in the CBC (constraint-based codesign) of embedded systems, which is presented by Chonlameth Arpnikanondt, is analyzed. Some deficiencies of the method when it is applied in the complicated embedded systems codesign are proposed. According to these deficiencies, the meaning of constraint is extended, and a solution is proposed to improve the efficiency in hardware/software codesign and is explained in detail with the example of mart phone system, which is developed by the Institute of Software, the Chinese Academy of Sciences.

    参考文献
    相似文献
    引证文献
引用本文

陈思功,秦晓,章恒翀.基于UML的软硬件协同设计的模型分析方法.软件学报,2003,14(1):103-109

复制
分享
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2001-08-13
  • 最后修改日期:2001-12-19
  • 录用日期:
  • 在线发布日期:
  • 出版日期:
您是第位访问者
版权所有:中国科学院软件研究所 京ICP备05046678号-3
地址:北京市海淀区中关村南四街4号,邮政编码:100190
电话:010-62562563 传真:010-62562533 Email:jos@iscas.ac.cn
技术支持:北京勤云科技发展有限公司

京公网安备 11040202500063号